Lined Elbow 90°

Pipework (NB)	Jacket Size ∅OD			∅OD1	∅ID	∅RF	∅P.C.D	∅P.C.D1	Nh	Nh1	∅H	∅H1	T	T1	Length	Lining THK
Inches	mm	mm	mm	mm	mm	mm	mm	mm	mm	mm	mm	mm	mm	mm	mm	mm
1”	25	50	108	152.4	19	51	79.4	120.6	4	4	16	19	14.3	19	200-3000	3.5
1.1/2”	40	65	127	177.8	34	73	98.4	139.7	4	4	16	19	17.5	22.2	200-3000	3.5
2”	50	80	152.4	190.5	45	92	120.6	152.4	4	4	19	19	19	23.8	200-3000	3.5
2.1/2”	65	100	177.8	228.6	55	105	139.7	190.5	4	8	19	19	22.2	23.8	200-3000	3.5
3”	80	100	190.5	228.6	69	127	152.4	190.5	4	8	19	19	23.8	23.8	200-3000	4.0
4”	100	150	228.6	279.4	92	157	190.5	241.3	8	8	19	22.2	23.8	25.4	200-3000	4.0
6”	150	200	279.4	342.9	144	216	241.3	298.4	8	8	22.2	22.2	25.4	28.6	200-3000	5.0
8”	200	250	342.9	406.4	192	270	298.4	361.9	8	12	22.2	25.4	28.6	30.2	300-3000	6.0
10”	250	300	406.4	482.6	241	324	361.9	431.8	12	12	25.4	25.4	30.2	31.8	300-3000	7.0
12”	300	350	482.6	533.4	296	381	431.8	476.2	12	12	25.4	28.6	31.8	34.9	300-3000	7.0

Item Des.	Material (standard)	Material (optional)
SHELL	ASTM A 234 Gr. WPB	Ss304, SS304L, SS 316. SS316L
SHELL SCHEDULE	SCH.40	SCH.10, SCH.20, SCH.30, SCH.60, SCH.80, SCH.100, SCH.120, SCH.140, SCH.160
LINING	PTFE ASTM D 1457. TYPE: III	PVDF-ASTM D 3322, PP-ASTM D 4101, HDPE, ANTISTATIC PTFE
FLANGE	ANSI B 16.5-ASA150# (MADE FROM IS 2062 PLATE)	ASTM A105, Ss304, SS304L, Ss316, SS316L (ROTATING, FLANGE IS ALSO AVAILABLE ON REQUEST )
FLANGE RATING	ASA150#	CLS.300, CLS.600, BS10-TABLE D, TABLE E, TABLE F, TABLE H, TABLE J, & TABLE K, DIN STANDARD- Pn6, PN10,PN16, Pn25 & PN40

100% Visual Check/Dimensional Check
100% Hydro Test at 29.9 kg/cm(g) for holding time of 3 Mins. as per ASTM F 1545 - 15A
100% Spark Test at 10 kv after Lining
100% Lining tdk. to be checked. (>80% of Flaring tdk.)

Product Categories